Skip to main content

What are the steps of a hair transplant procedure ?

Hair transplantation involves removing small punch grafts from the hair bearing scalp or a larger piece of this scalp from a donor area and cutting this into smaller pieces to use as grafts. These grafts are then relocating to a bald or thinning area of the scalp. The grafts created in this manner differ in size and shape. Round-shaped punch grafts usually contain about 10-15 hairs. The much smaller mini-graft contains about two to four hairs; and the micro-graft, one to two hairs. Slit grafts, which are inserted into slits created in the scalp, contain about four to 10 hairs each; strip grafts are long and thin and contain 30-40 hairs.


Generally, several surgical sessions may be needed to achieve satisfactory fullness, and a healing interval of several months is usually recommended between each session. It may take up to two years before you see the final result with a full transplant series. The amount of coverage you'll need is partly dependent upon the color and texture of your hair. Coarse, gray or light-colored hair affords better coverage than fine, dark-colored hair. The number of large plugs transplanted in the first session varies with each individual, but the average is about 50. For mini-grafts or micro-grafts, the number can be up to 700 per session.

Just before surgery, the "donor area" will be trimmed short so that the grafts can be easily accessed and removed. For punch grafts, your doctor may use a special tube-like instrument made of sharp carbon steel that punches the round graft out of the donor site so it can be replaced in the area to be covered—generally the frontal hairline. For other types of grafts, your doctor will use a scalpel to remove small sections of hair-bearing scalp, which will be divided into tiny sections and transplanted into tiny holes or slits within the scalp. When grafts are taken, your doctor may periodically inject small amounts of saline solution into the scalp to maintain proper skin strength. The donor site holes may be closed with stitches—for punch grafts, a single stitch may close each punch site; for other types of grafts, a small, straight-line scar will result. The stitches are usually concealed with the surrounding hair.

To maintain healthy circulation in the scalp, the grafts are placed about one-eighth of an inch apart. In later sessions, the spaces between the plugs will be filled in with additional grafts. Your doctor will take great care in removing and placement of grafts to ensure that the transplanted hair will grow in a natural direction and that hair growth at the donor site is not adversely affected.

After the grafting session is complete, the scalp will be cleansed and covered with gauze. You may have to wear a pressure bandage for a day or two. Some doctors allow their patients to recover bandage-free.

Tissue Expansion

Another technique used in the treatment of baldness is called tissue expansion. Plastic surgeons are the leaders in tissue expansion, a procedure commonly used in reconstructive surgery to repair burn wounds and injuries with significant skin loss. Its application in hair transplant surgery has yielded dramatic results-significant coverage in a relatively short amount of time.

In this technique, a balloon-like device called a tissue expander is inserted beneath hair-bearing scalp that lies next to a bald area. The device is gradually inflated with salt water over a period of weeks, causing the skin to expand and grow new skin cells. This causes a bulge beneath the hair-bearing scalp, especially after several weeks.

When the skin beneath the hair has stretched enough-usually about two months after the first operation-another procedure is performed to bring the expanded skin over to cover the adjacent bald area. For more information about tissue expansion, ask your plastic surgeon for the American Society of Plastic Surgeons, Inc. brochure entitled, Tissue Expansion: Creating New Skin from Old.

Flap Surgery

Flap surgery on the scalp has been performed successfully for more than 20 years. This procedure is capable of quickly covering large areas of baldness and is customized for each individual patient. The size of the flap and its placement are largely dependent upon the patient's goals and needs. One flap can do the work of 350 or more punch grafts.

hair transplant step by step procedure


A section of bald scalp is cut out and a flap of hair-bearing skin is lifted off the surface while still attached at one end. The hair-bearing flap is brought into its new position and sewn into place, while remaining "tethered" to its original blood supply. As you heal, you'll notice that the scar is camouflaged—or at least obscured—by relocated hair, which grows to the very edge of the incision.

In recent years, plastic surgeons have made significant advances in flap techniques, combining flap surgery and scalp reduction for better coverage of the crown; or with tissue expansion, to provide better frontal coverage and a more natural hairline.

Scalp Reduction

This technique is sometimes referred to as advancement flap surgery because sections of hair-bearing scalp are pulled forward or "advanced" to fill in a bald crown.

Scalp reduction is for coverage of bald areas at the top and back of the head. It's not beneficial for coverage of the frontal hairline. After the scalp is injected with a local anesthetic, a segment of bald scalp is removed. The pattern of the section of removed scalp varies widely, depending on the patient's goals. If a large amount of coverage is needed, doctors commonly remove a segment of scalp in an inverted Y-shape. Excisions may also be shaped like a U, a pointed oval or some other figure.

hair transplant step by step photos


The skin surrounding the cut-out area is loosened and pulled, so that the sections of hair-bearing scalp can be brought together and closed with stitches. It's likely that you'll feel a strong tugging at this point, and occasional pain.

Procedure Steps

Before: Hair transplant candidates should have some noticeable hair loss with healthy hair growth at the back and sides of the head to serve as donor areas.
hair transplant
Step 1: A tube-like instrument punches round grafts from the donor site to be placed in the area where hair replacement is desired.
hair transplant
Step 2: A tube-like instrument punches round grafts from the donor site to be placed in the area where hair replacement is desired.
hair transplant
Step 3: When the skin beneath the hair has stretched enough, it is surgically placed over the bald area.
hair transplant
Step 4: During flap surgery, a section of bald scalp is cut out and a flap of hair-bearing skin is sewn into its place.
hair transplant
Step 5: The patterns used in scalp reduction vary widely, yet all meet the goal of bringing hair and scalp together to cover bald areas.
hair transplant
After: The results of hair transplant surgery can enhance your appearance and self-confidence.
hair transplant

Comments

Popular posts from this blog

How to Test Ceramic Disc Capacitor

Ceramic disc capacitors are units used to manage voltage for various dielectric functions in the computer industry. high voltage ceramic capacitor ,  The role of ceramic layers is to dissipate heat which may occur due to high voltage, while protecting the environment — both internal and external — from damage. With these capacitors, volumetric efficiency is inversely proportional to stability and accuracy, thus making the testing process difficult.



Step 1 Testing ceramic capacitors is important, because, when exposed to high voltage, the capacitors may short out. If this occurs, your monitor may blink or be absent. You can solve this problem by replacing the ceramic capacitors all together. However, if you have the proper equipment you can test the ceramic capacitors.
Step 2 Use a digital multimeter to test a ceramic capacitor. If the voltage is constant, the capacitor functions properly. However, you cannot measure it properly if the ohmmeter's output and digital capacitance don…

How Should Shoes Actually Fit?

The Wall Street Journal’s senior style reporter Elizabeth Holmes Opens a New Window.  recently started her column Opens a New Window. New Dior Homme Collection  by asking a simple question: “When was the last time you had your foot measured to check your shoe size?” I promptly answered in my head and also possibly aloud, “Well, when my foot last stopped growing. Why would I need to do it again? I’m a grown adult human who pays the majority of my bills on time. I think I know how to buy and wear shoes.”






Apparently not. Holmes’s article goes on to explain how our feet have grown an average of two sizes since the 1970s in order to support us as the species grows taller, which is changing how shoes are designed, made, and sold by older, established brands. She also cites a recent U.K. study of more than 2,000 similarly grown adults, which proves that while sitcoms and stereotypes suggest it’s women who choose style over comfort, about a third of men are also wearing shoes that don’t prop…

Why we use X-Pac Materials in our Bags and Packs

We build our gear with a purpose, and the materials used are often the most important aspect. We have constructed some of our rough-and-tumble products with a material called X-Pac™, it's not only visibly durable, but built for the adventure ahead. Trust these products to hold up for the long haul.
Topo Backpacks at Seikk

The combination of X-Pac Ripstop Polyester, waterproof construction technology, and 210 denier nylon fabric face provides an ideal balance of weight and durability. Making for a great all around mountain companion, whether you are hiking, biking, climbing or skiing.


The X-Ply (diamond pattern) provides additional strength across the bias, traditionally the weakest part of the pack.

Dimension-Polyant, the manufacture of X-Pac material, sets the standard for all the high quality "trust with your life" fabrics used in sailcloth for yacht sails, dinghy sails, surf sails, surf kites, hang gliders, paragliders, hot air balloons, Topo Designs packs and much mo…